Dual Hold-Ccis - NEC NEAX 2000 IPS System Manual

DUAL HOLD-CCIS

General Description
This feature allows two connected D
enables the held parties to answer or originate a call from a secondary extension or the idle prime exten-
sion.
Programming
START
CM12 Assign Service Restriction Class B to the re-
quired stations.
CM15 Allow Dual Hold in Service Restriction Class
B assigned by CM12 Y=02.
END
Operating Procedure
To operate Dual Hold-CCIS from a D
1. The user at Station A presses the Hold key; the user at Station B is placed on hold.
2. The user at Station B presses the Hold key; the user at Station A is placed on hold.
3. Dual Hold-CCIS is now in progress.
term
s to be placed on hold simultaneously over the CCIS link. This
DESCRIPTION
term
:
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=02
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
ZZ: 00-15 : Service Restriction
• Y=64
(1) 00-15: Service Restriction Class B as-
(2) 1 : Allow
– 275 –
DUAL HOLD-CCIS
DATA
Class B
signed by CM12 Y=02.
NWA-008853-001 Rev.3.0
97ch3004.fm