Voice Call-Ccis - NEC NEAX 2000 IPS System Manual
Internet protocol server ccis system manual
Hide thumbs
Also See for NEAX 2000 IPS:
- Command manual (1038 pages) ,
- Installation manual (619 pages) ,
- Reference manual (421 pages)
Table of Contents
Advertisement
VOICE CALL-CCIS
General Description
This feature provides a voice path, through the CCIS network, between a D
in another office. This path is established from the calling party to the called party's built-in speaker. If
the called party's MIC lamp is on, the called party can have a conversation in hands-free.
Programming
START
CM90
Assign a Voice Call key to the D
END
Operating Procedure
term
From a D
to another D
1. The originating D
back tone.
2. The calling party presses the Voice Call feature key.
A signal tone is transmitted over the CCIS network to the called party's speaker.
The calling party's LCD shows:
3. The called party presses the MIC key (if the MIC LED is not lit) to allow two-way conversation
with the calling party.
DESCRIPTION
term
.
term
:
term
user dials the desired station number in another office, and receives ring
VOICE CALL
(TIME DISPLAY)
Called D
CHAPTER 3 SYSTEM DATA PROGRAMMING
•
Y=00
(1)
My Line No. +
(2)
F1002: Voice Call
XXXX
term
– 341 –
VOICE CALL-CCIS
term
in one office and a D
DATA
,
+ Key No.
NWA-008853-001 Rev.3.0
97ch3005.fm
term
Advertisement
Table of Contents
