NEC NEAX 2000 IPS System Manual page 139

A
CM90 Assign a service feature access key for LCR
Group 0-2 to D
CM35 Assign the Area Code Development Pattern
number for maximum digit analysis to each
trunk route.
CM8A Assign an Area Code Development Pattern
number to each LCR Group.
Assign a Route Pattern number to each area
code for the Area Code Development Pattern
number assigned by CM8A Y=A000.
Assign a LCR Pattern number to each area
code for the Area Code Development Pattern
number assigned by CM8A Y=A000.
For area code deletion, designate the digits to
be not deleted.
Assign the next Route Pattern number to the
Route Pattern number assigned by CM8A
Y=4005-4007.
NOTE: This data is required to expand the
order of LCR selection that is as-
signed by CM8A Y=0000-0255.
The order of LCR selection can be
expand to the maximum seventh.
B
DESCRIPTION
term
, if required.
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=00
(1) My Line No. +
(2) F0A26-F0A28: LCR Group 0-2
• Y=76
(1) 00-63: Trunk Route No.
(2) 05-07: Area Code Development Pattern
No. 5-7
• Y=A000
(1) 0-3: LCR Group 0-3
(2) 4005-4007: Area Code Development Pat-
• Y=4005-4007 Area Code Development
(1) X...X: Area Code, Maximum 8 digits
(2) 0000-0255: Route Pattern No. 000-255
• Y=4005-4007 Area Code Development
(1) X...X: Area Code, Maximum 8 digits
(2) 5000-5255: LCR Pattern No. 000-255
• Y=5000-5255 LCR Pattern No. 000-255
(1) 152: Deletion of all digits of the area code
assigned by CM8A Y=4005-4007
(2) 1 : Not deleted
• Y=0000-0255 Route Pattern No. 000-255
(1) 0: Designation of next table
(2) 0000-0255: Next Route Pattern No. 000-
– 125 –
DIGITAL CCIS PROGRAMMING
DATA
,
+ Key No.
tern No. 5-7
Pattern No. 5-7
Pattern No. 5-7
255
NWA-008853-001 Rev.3.0
97ch3001.fm
JANUARY/31/2006