Route Advance Assignment - NEC NEAX 2000 IPS System Manual

Route Advance Assignment

To provide the Alternative Routing (another trunk route) for CCT when an outgoing call via No. 7 CCIS
is not available due to a fault occurrence, do the following programming.
START
CM35 Provide the voice channel route of CCT with
Alternative Routing for a fault occurrence.
Provide the tandem calls with Alternative
Routing for a fault occurrence.
CM08 Provide the system with Alternative Routing
of CCIS outgoing call when all outgoing
trunks of tandem office are busy.
CM41 Set the ORT timer when established tandem
connection to CCIS.
CM29 Assign a Numbering Plan Group to each ten-
ant.
CM20 Assign the access code for LCR Group 0-3.
A
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=186
(1) 00-63: Trunk Route No.
(2) 0 : To provide
1 : Not provided
• Y=192
(1) 00-63: Trunk Route No.
(2) 0 : To provide
1 : Not provided
(1) 372
(2) 0 : To provide
1 : Not provided
• Y=0
(1) 104
(2) 03-99: 03-99 seconds
(1 second increments)
If no data is set, the default setting is 7 seconds.
(1) 00-63: Tenant No.
(2) 710-713: Numbering Plan Group 0-3
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code
(2) A126: LCR Group 0
A127: LCR Group 1
A128: LCR Group 2
A129: LCR Group 3
– 124 –
DIGITAL CCIS PROGRAMMING
DATA
NWA-008853-001 Rev.3.0
97ch3001.fm
JANUARY/31/2006