NEC NEAX 2000 IPS System Manual page 229

B
CM60 Assign the Charging Class number for AT-
TCON/DESKCON number.
CMDD04 Specify the direction for sending detail infor-
mation on C.O./Tie Line outgoing calls from
the Local Office.
Specify the direction for sending detail infor-
mation on C.O./Tie Line incoming calls from
the Local Office.
CMDD03
Assign the originating office number, if re-
quired.
See Example 4: Data Assignment of CMA7
Y=06 and CMDD03>55.
Assign the billing office number, if required.
NOTE: If using a leading digits of 0 and 0 is
required to print at the SMDR termi-
nal, assign "A" for each leading 0
to be printed.
If the leading digits 0 is not required
to print at the SMDR terminal, as-
sign "0".
See Example 5: Data Assignment of
CMDD03>56.
CM13 Provide the SMDR service for outgoing calls
to the required station.
C
DESCRIPTION
Page 242
Page 243
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=32
(1) 0-7: ATTCON No.
(2) 00-15 : Class No.
(1) XX 04: Send detail information of C.O./
XX : Service Class No. assigned by
(2) 1: To send
(1) XX 08: Send detail information of C.O./
XX : Service Class No. assigned by
(2) 1: To send
(1) 55
(2) 0-9999: Originating Office No.
(1) 56
(2) 0-9999: Billing Office No.
• Y=06
(1) X-XXXXXXXX: Station No.
(2) 1 : To provide
– 215 –
CENTRALIZED BILLING-CCIS
DATA
Tie Line outgoing calls to the
SMDR
CM12 Y=45/CM60 Y=32
Tie Line incoming calls to the
SMDR
CM12 Y=45/CM60 Y=32
NOTE
NOTE
NWA-008853-001 Rev.3.0
97ch3003.fm