Inter-Tenant Connection Assignment - NEC NEAX 2000 IPS System Manual

Inter-Tenant Connection Assignment

START
CM12 Assign the tenant number to each station.
NOTE:
CM30 Assign the tenant number to each trunk.
NOTE:
CM63 Specify the inter-tenant connection for station-
to-station calling or incoming call termination.
(See Example 1, 2 in the following pages.)
END
DESCRIPTION
When linking with the 2400 IPX, the
tenant number for the 2000 IPS
should be assigned as 01-63. 00 is
not used.
When linking with the 2400 IPX, the
tenant number for the 2000 IPS
should be assigned as 01-63. 00 is
not used.
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=04
(1) X-XXXXXXXX: Station No.
(2) 00-63: Tenant No. 00-63
01 : Tenant No. 01
• Y=01
(1) 000-254: Trunk No.
(2) 00-63: Tenant No. 00-63
01 : Tenant No. 01
• Y=1 Station-to-Station Calling
(1) XX ZZ
XX: 00-63: Tenant No. of Calling Station
ZZ : 00-63: Tenant No. of Called Station
(2) 0 : Restricted
1 : Allow
• Y=2 Incoming Call Termination
(1) XX ZZ
XX: 00-63: Tenant No. of Called Station
ZZ : 00-63: Tenant No. of Trunk
(2) 0 : Restricted
1 : Allow
– 111 –
DIGITAL CCIS PROGRAMMING
DATA
NWA-008853-001 Rev.3.0
97ch3001.fm