NEC NEAX 2000 IPS System Manual page 285

A
CM90 If the Attendant Console is assigned as the des-
tination by CM51, assign a Call Forwarding-
Intercept (ICPT) key to the console.
Assign a Do Not Disturb function key to the
term
D , if required.
Assign Do Not Disturb and Do Not Disturb
Override function keys to the ATTCON/
DESKCON.
CM08 Specify the Call Forwarding-Busy Line/Sta-
tion Hunting for a station with Do Not Disturb
set.
For a system with multiple-tenant, specify the
destination of a call transferred in CM51
Y=10.
CM48 Select the Dial Tone on setting Do Not Disturb.
END
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=00
(1) My Line No. +
(2) F6065: Call Forwarding-Intercept Key
• Y=00
(1) My Line No. +
(2) F0022: Do Not Disturb set/reset
• Y=00
(1) ATTCON No. (E000-E007) +
No.
(2) F6102: Do Not Disturb
F6104: Reset
(1) 240
(2) 0 : Available
1 : Not available
(1) 241
(2) 0 : Tenant of called station
1 : Tenant of calling station
• Y=2
(1) 14: Dial Tone on setting Do Not Disturb
(2) 0 : Special Dial Tone (Stutter Dial Tone)
1 : Dial Tone
– 271 –
DO NOT DISTURB-CCIS
DATA
,
+ Key No.
,
+ Key No.
,
+ Key
NWA-008853-001 Rev.3.0
97ch3004.fm
JANUARY/31/2006