Mounting Location Of Circuit Cards; Regular Pim - NEC NEAX 2000 IPS System Manual

MOUNTING LOCATION OF CIRCUIT CARDS

This section explains the location for mounting circuit cards for the CCIS.

Regular PIM

The figure below shows circuit card mounting slots allocated in the regular PIM.
AC/DC
PIM
PWR
0-7
DC/DC
PWR
LT00-LT11
AP00-AP11 : Application Processor card mounting
MP12
*1 The following application processor cards are mounted in the AP00-AP11 slots of PIM0-7.
PN-SC00 (CCH), PN-AP00-B (AP00), PN-24CCTA/PN-30CCTA/PN-DTA (CCT),
PN-24DTA-C (DTI), PN-30DTC-C (DTI)
PZ-M537 (EXPMEM) card is mounted on the PN-AP00-B (AP00) card.
*2 The following line/trunk cards are mounted in the LT00-LT11 slots of PIM0-7.
PN-M10 (M10), PN-2LDTA/PN-4LDTA (LDT), PN-2ODTA/PN-2ODTB (ODT)
*3 PZ-M542/PZ-M557 (CONN) card is mounted into the LTC0-LTC3 connectors on the PIM which
accommodates the 30DTI/30CCT card.
Circuit Card Mounting Slots (Regular PIM)
LTC0
: Line/Trunk card mounting slots
slots
: PN-CP24-A/PN-CP24-B/PN-CP24-C/
PN-CP24-D mounting slot
CHAPTER 4 CIRCUIT CARD INFORMATION
MOUNTING LOCATION OF CIRCUIT CARDS
*1 *2
LTC1
LTC2
BWB
FRONT
FP12 : PN-CP15 mounting slot
VM : PZ-VM00/VM00-M/VM10-M mounting slot
PFT : PZ-8PFTB mounting slot
AC/DC PWR: PZ-PW121/PW126 mounting slot
DC/DC PWR: PZ-PW122 mounting slot
– 353 –
*3
LTC3
NWA-008853-001 Rev.3.0
97ch4001.fm
JULY/01/2006