NEC NEAX 2000 IPS System Manual page 293

A
CM08 Specify the result of Switch Hook Flash on Hot
Line station.
To allow Hot Line stations to transfer a call or
access a feature, set the data to"0".
END
Operating Procedure
To place a Hot Line-CCIS call:
1. The user at Station A lifts the handset.
2. Station B is rung.
3. The user at Station B lifts the handset and the connection is established.
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
(1) 057
(2) 0 : Special Dial Tone
1 : Attendant Recall
– 279 –
HOT LINE-CCIS
DATA
NWA-008853-001 Rev.3.0
97ch3004.fm