NEC NEAX 2000 IPS System Manual page 360

• For a VMS office (Office B)
START
CM13 Provide Voice Mail Live Record-CCIS.
NOTE: Set the second data to "0" for all the
VMS ports performing Voice Mail
Live Record-CCIS.
CM08 Specify whether a Live Record Start signal that
includes caller information (such as station
number and a kind of calling party) is sent to
the VMS.
Specify whether a release signal is sent to the
VMS, when a station/trunk hangs up while ac-
cessing the VMS
Specify whether MW lamp control on a station
of an opposite office from the VMS via CCIS
is available.
NOTE:
1st data=0 is effective only when
CM08>702: 0.
END
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=57
(1) X-XXXXXXXX: Voice mail station No.
(2) 0: To provide
(1) 702
(2) 0: To send
(1) 704
(2) 0: To send
(1) 706
(2) 0 : Available
1 : Not available
– 346 –
VOICE MAIL LIVE RECORD-CCIS
DATA
NWA-008853-001 Rev.3.0
97ch3005.fm
JANUARY/31/2006