NEC NEAX 2000 IPS System Manual page 230

C
CM35 Provide SMDR service for outgoing calls to
the required trunk route.
Assign a trunk access code sent to SMDR for
outgoing calls.
Provide SMDR service for incoming calls to
the required trunk routes.
CMDD00 Specify the direction for sending detail infor-
mation on tandem calls from Local Office.
For local office to SMDR, specify the buffer-
ing method when the number of the stored
SMDR information has reached to the prede-
termined value.
Specify whether account code is sent in the
Authorization Code Area of Call Record for
tandem calls.
Specify whether the access code is added in
Call Record.
Specify whether DID number is set in destina-
tion number area of Call Record.
Specify whether ANI for local office is sent to
SMDR.
NOTE: CMDD00>173 is not available for
the extended NEAX 2400 IMS For-
mat.
D
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=14
(1) 00-63: Trunk Route No.
(2) 1 : To provide
• Y=44
(1) 00-63: Trunk Route No.
(2) 00-99: Trunk Access Code
• Y=49
(1) 00-63: Trunk Route No.
(2) 0: To provide
(1) 2: Send detail information of tandem call to
SMDR
(2) 0 : Not sent
1 : To send
(1) 7
(2) 0 : New data is stored by deleting the old-
est data
1 : No new data is stored
(1) 170
(2) 0 : Not sent
1 : To send
(1) 171
(2) 0 : Not added
1 : To add
(1) 172
(2) 0 : To set
1 : Not set
(1) 173
(2) 0 : Not sent
1 : To send
– 216 –
CENTRALIZED BILLING-CCIS
DATA
NWA-008853-001 Rev.3.0
97ch3003.fm
JANUARY/31/2006