NEC NEAX 2000 IPS System Manual page 210

A
CMDD00 Specify Local Office or Center Office for Cen-
tralized Billing-CCIS
CMDD02 Assign maximum number of Call Record
sending to SMDR terminal 0.
NOTE:
When the data is set to 1-23580, ex-
ternal alarm of memory overflew is
available, if CM44 2nd data=3000
is assigned.
Assign maximum number of Call Record
sending to SMDR terminal 1.
NOTE: When the data is set to 1-23580, ex-
ternal alarm of memory overflew is
available, if CM44 2nd data=3002
is assigned.
Assign maximum number of Call Record for a
local office of Centralized Billing-CCIS.
NOTE 1: When the data is set to 1-23580, ex-
ternal alarm of memory overflew is
available, if CM44 2nd data=3001
is assigned.
NOTE 2: The amount of call record number set by CMDD02>0, 1, 2 must not exceed the following
number.
No EXPMEM on AP00 (PN-AP00-B) is provided
CMDD00>3 is set to 0
(Local Office of
Centralized Billing-
CCIS/Stand-alone)
2620
NOTE 3: CMDD02>0, 1, 2 are effective after executing CMDD98. Before executing CMDD98, be
sure to print out all of the stored call records. CMDD98 deletes all of the stored call
records.
B
DESCRIPTION
Amount of Call Records number of CMDD02 1st data 0, 1, 2
CMDD00>3 is set to 1
(Center Office of
Centralized Billing-
CCIS)
1310
CHAPTER 3 SYSTEM DATA PROGRAMMING
(1) 3
(2) 0 : Local Office
1 : Center Office
(1) 0
(2) 0
1-23580 : 1 call-23580 calls
(1) 1
(2) 0
1-23580 : 1 call-23580 calls
(1) 2
(2) 0
1-23580 : 1 call-23580 calls
EXPMEM on AP00 (PN-AP00-B)/
AP00 (PN-AP00-D) is provided
CMDD00>3 is set to 0
(Local Office of
Centralized Billing-
CCIS/Stand-alone)
23580
– 196 –
CENTRALIZED BILLING-CCIS
DATA
: Not record
: Not record
: Not record
CMDD00>3 is set to 1
(Center Office of
Centralized Billing-
CCIS)
22270
NWA-008853-001 Rev.3.0
97ch3003.fm
JULY/01/2006