NEC NEAX 2000 IPS System Manual page 174

B
CMA7 Allow or restrict Multiple Call Forwarding-All
Calls/Busy Line/Don't Answer-CCIS for each
CCH number.
CM42 Specify the number of times of Multiple Call
Forwarding-All Calls/Busy Line/Don't An-
swer-CCIS.
CM65 Provide Call Forwarding feature with each ten-
ant as per incoming call type.
CM90 Assign the Call Forwarding-Busy Line key to
term
a D , if desired.
END
CALL FORWARDING-BUSY LINE-CCIS/MULTIPLE CALL FORWARDING-BUSY LINE-CCIS
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=29
(1) 0-7: CCH No.
(2) 0 : Allowed
1 : Restricted (Only once)
(1) 72
(2) 01-07: 1 time-7 times
If no data is set, the default setting is 5
times.
• Y=23
Internal Call or ATT assisted call
• Y=24 C.O. Incoming Call
• Y=25 Tie Line Incoming Call
(1) 00-63: Tenant No.
(2) 1 : Call Forwarding
• Y=00
(1) My Line No. +
(2) F0014: Call Forwarding-Busy Line Set/
For setting the same key as Call Forwarding-
Don't Answer:
(1) My Line No. +
(2) F0012: Call Forwarding-Don't Answer/
– 160 –
DATA
,
+ Key No.
Cancel
,
+ Key No.
Busy Line Set/Cancel
NWA-008853-001 Rev.3.0
97ch3002.fm