NEC NEAX 2000 IPS System Manual page 152

To reenter a Camped-On trunk from an Attendant before Automatic Recall:
START
CM20 Assign the access code for Call Pickup-
Direct.
END
To display the busy station number and name on an Attendant Console when reentering a Camped-On
trunk by pressing the loop key:
START
CM08 Provide the Attendant Console with the busy
station number/name display when reentering
a Camped-On trunk.
END
Operating Procedure
To activate an Attendant Camp-On with Tone Indication-CCIS from an Attendant Console:
1. Dial the desired station number at another switching office and receive busy tone.
2. Press the RELEASE key.
3. A Camp-On tone is sent to the busy station and Camp-On is set.
To cancel an Attendant Camp-On with Tone Indication-CCIS from an Attendant Console:
1. Press the LOOP key corresponding to the held call and connect to the waiting trunk party.
2. Press the DEST key and receive busy tone.
3. Press the CANCL key.
DESCRIPTION
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
ATTENDANT CAMP-ON WITH TONE INDICATION-CCIS
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code
(2) A021: Call Pickup-Direct
(1) 441
(2) 0 : Available
1 : Not available
– 138 –
DATA
DATA
NWA-008853-001 Rev.3.0
97ch3002.fm