Brokerage-Hot Line-Ccis - NEC NEAX 2000 IPS System Manual

BROKERAGE-HOT LINE-CCIS

General Description
This feature provides a ringdown connection between two stations, each using a D
in the CCIS network.
Programming
START
CM11 Assign the Virtual Line station number to the
required Virtual LEN.
CM12 Assign the Hot Line to the Virtual Line stations
assigned by CM11.
CM71 Allocate the memory area for the Hot Line-
Outside call.
For example, to assign the 10 Hot Line-Out-
side calls into No. 100 through No. 109 Mem-
ory Slots, 2nd data is "100010". Abbreviated
Codes are automatically assigned as shown be-
low:
Memory Slot 100
Memory Slot 109
CM72 Assign the destination party's number and
name to each Memory Slot number.
A
DESCRIPTION
Abbrev. Codes
00
09
CHAPTER 3 SYSTEM DATA PROGRAMMING
(1) 000-255: Virtual LEN
(2) X-XXXXXXXX: Virtual Line station No.
• Y=03
(1) X-XXXXXXXX: Virtual Line station No.
(2) 04: Hot Line
(1) 65: For Hot Line-Outside
(2) XXX YYY
XXX: 000-299 (Starting Memory Slot No.
YYY: 001-300 (No. of Memory Slots to be
• Y=0
(1) 000-299: Memory Slot No.
(2) XXXX
XXXX: Access Code (Maximum 4 digits)
,
YY...Y : Calling Party's No.
• Y=1
(1) 000-299: Memory Slot No.
(2) XXX...X: Station Name Character Code
See CM77 in the Command Manual.
– 140 –
BROKERAGE-HOT LINE-CCIS
term
, in different offices
DATA
in blocks)
assigned in blocks)
,
YY...Y
: Separator Mark
(Maximum 26 digits)
(Maximum 32 digits: 16 charac-
ters)
NWA-008853-001 Rev.3.0
97ch3002.fm