Attendant Camp-On With Tone Indication-Ccis - NEC NEAX 2000 IPS System Manual

ATTENDANT CAMP-ON WITH TONE INDICATION-CCIS

General Description
This feature permits the Attendant, when the desired station at another switching office is busy, to hold an
incoming call in a special waiting mode. A distinctive Camp-On tone is sent to the busy station when the
Attendant sets Camp-On. When that station becomes idle, it is automatically rung and connected to the
waiting trunk party.
Station Application
Attendant Console
Programming
START
CM08 Specify the Camp-On Tone sent to busy sta-
tion.
CM41
Specify the recall timing of Camp-On.
END
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
ATTENDANT CAMP-ON WITH TONE INDICATION-CCIS
(1) 068
(2) 0 : Camp on Tone is sent out only once.
1 : Camp on Tone is repeated at an
interval of 4 seconds
• Y=0
(1) 00
(2) 01-14: 2.4-33.6 seconds
(2.4 second increments)
15-24: 38.4-124.8 seconds
(9.6 second increments)
If no data is set, the default setting is 31.2-33.6
seconds.
– 137 –
DATA
NWA-008853-001 Rev.3.0
97ch3002.fm