House Phone-Ccis - NEC NEAX 2000 IPS System Manual

HOUSE PHONE-CCIS

General Description
This feature allows selected stations to call an Attendant Console, through the CCIS network, simply by
going off hook.
Programming
Use the Hot Line-Outside feature.
START
CM12 Assign a Hot Line (House-phone) to the re-
quired station.
CM71 Allocate memory area for Hot Line-Outside
calls. For example, to assign 10 Hot Line-Out-
side calls into No. 100 through No. 109 Mem-
ory Slots, 2nd data is "100010." Abbreviated
Codes are automatically assigned as shown be-
low:
Memory Slot 100
Memory Slot 109
CM72 Assign the destination party's number to each
Memory Slot number.
CM52 Define the Hot Line (House-phone) pairs.
END
DESCRIPTION
Abbrev. Codes
00
09
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=03
(1) X-XXXXXXXX: Station No.
(2) 04: Hot Line (House-phone)
(1) 65: For Hot Line-Outside
(2) XXX ZZZ
XXX: 000-299 (Starting Memory Slot No.
ZZZ : 001-300 (No. of Memory Slots to be
• Y=0
(1) 000-299: Memory Slot No.
(2) XXXX
XXXX : Access Code (Maximum 4 digits)
,
YY...Y : Calling Party's No.
• Y=00-99 Hot Line Pair No.
(1) 0: Calling Side
(2) X-XXXXXXXX: Virtual Station No.
(1) 1: Called Side
(2) C XX (for Outside party)
XX: 00-09 (Abbreviated Code given by
– 280 –
HOUSE PHONE-CCIS
DATA
in blocks)
assigned in blocks)
,
YY...Y
: Separator Mark
(Maximum 26 digits)
CM71)
NWA-008853-001 Rev.3.0
97ch3004.fm