NEC NEAX 2000 IPS System Manual page 267

A
CMEA Specify the external alarm kind which is auto-
matically sent.
Specify the contents which is sent to the Inte-
grated Maintenance office as external alarm
kind.
Specify the Point Code of the office, which the
fault information is sent to.
Assign the name of own office.
END
Operating Procedure
For Centralized MAT for 2400 IPX, refer to associated document of Centralized MAT for 2400 IPX.
For Centralized MAT for 2000 IPS, refer to Centralized MAT User Guide.
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=3
(1) 00-02: External Alarm Kind set by CMEA
(2) 0 : Send
1 : Not sent
• Y=4
(1) 01: Kind of Information Transferred
(2) 2: External Alarm Kind
• Y=4
(1) 05: Destination office's point code to which
the fault information transferred
(2) 1-16367: Point Code
• Y=5
(1) 01: With Character Codes
(2) 20-7F: Character Code
(See CM77 in the Command Manual.)
(1) 02: With Characters
(2) XX...XX: Office name
– 253 –
CENTRALIZED MAT-CCIS
DATA
Y=2
(Maximum 32 digits, 16 characters)
(Maximum 16 characters)
NWA-008853-001 Rev.3.0
97ch3004.fm