NEC NEAX 2000 IPS System Manual page 33

EQUIPMENT FUNCTIONAL
NAME
PZ-M537 EXPMEM
PZ-M542 CONN
PZ-M557 CONN
[For
Australia]
Card Name and Function
NAME
Memory Expansion Card for AP00 Card
The system capacity is expanded when PZ-M537 is mounted on
PN-AP00-B (AP00) card.
PZ-M537 cannot be mounted on PN-AP00-D (AP00) card.
Memory Expansion for AP00 is shown in the table below.
• PN-AP00-B with AP00 program
System
Capacity
SMDR call
record
• PN-AP00-B with MRCA program
System
Capacity
SMDR call
record
Coaxial Cable Connection Card
Used to connect a coaxial cable for the Digital Trunk Interface.
Maximum two cards can be connected to LTC connector of each
PIM.
Coaxial Cable Connection Card
Used to connect a coaxial cable for the Digital Trunk Interface.
Maximum two cards can be connected to LTC connector of each
PIM.
CHAPTER 1 GENERAL INFORMATION
FUNCTION
No EXPMEM
Local Office of Center Office
Centralized of Centralized
Billing-CCIS/ Billing-CCIS
Stand-alone
1600 800
No EXPMEM
Local Office of Center Office
Centralized of Centralized
Billing-CCIS/ Billing-CCIS
Stand-alone
2620 1965
– 19 –
CARD NAME AND FUNCTION
With EXPMEM
Local Office of Center Office
Centralized of Centralized
Billing-CCIS/ Billing-CCIS
Stand-alone
27000: Call Record for CIS is
not provided
26000: Call Record for CIS is
provided
With EXPMEM
Local Office of Center Office
Centralized of Centralized
Billing-CCIS/ Billing-CCIS
Stand-alone
23580 22925
NWA-008853-001 Rev.3.0
97ch1001.fm
JULY/01/2006