Setting Up And Installing Hp Storeall Hardware; Understanding Platform Configurations; Hp Storeall 8200 Gateway Storage System Configurations - HP StoreAll Series Installation Manual

2 Setting up and installing HP StoreAll hardware

This chapter describes the hardware components used in HP StoreAll Storage systems, and provides
cabling diagrams and networking information.

Understanding platform configurations

HP StoreAll 8200 Gateway Storage system configurations

The HP StoreAll 8200 supports the following configurations:
1 GbE network storage gateway
10 GbE network storage gateway
The system is comprised of HP StoreAll nodes, which are based on the ProLiant DL380p Gen8
server, and can be connected to select HP 3PAR StoreServ 7000- or 10000-series FC storage
systems.
NOTE: For specific hardware details for each configuration, see the HP StoreAll 8000 Storage
QuickSpecs, available at:
14792_na.pdf
See the following cabling diagrams for possible configurations of the HP StoreAll 8200 Gateway
Storage system.
Figure 1 HP StoreAll 8200 Gateway system with an HP 3PAR StoreServ P7200 (front)
1. HP StoreAll node couplet (front)
2. HP 3PAR StoreServ P7200 FC storage (front)
http://h18004.www1.hp.com/products/quickspecs/14792_na/
Understanding platform configurations 9