HP StoreAll Series Installation Manual page 84

6. Make advanced network configuration changes:
a. On the Advanced Configuration screen, select an interface option. Available options are:
NOTE:
Network Configuration screen. This action cancels entries made on this Advanced
Configuration screen.
b. Do one of the following:
c. If you opted to configure the interface, complete the fields listed on the Edit Bonded
Interface screen, and then click Ok.
84 Installing the HP StoreAll OS Software and configuring the HP StoreAll Storage system
Add Bond Device: Adds a new bond device to the network configuration.
Remove Bond Device: Removes an existing bond from the network configuration.
bondx: Unconfigured: Configures a bond device that has not yet been configured.
If more than one unconfigured device exists, those devices are also listed on the
Advanced Configuration screen.
You may press F2 from the Advanced Configuration screen to return to the
Select Continue to save interface selection change, and then go to
Select Configure to configure the selected interface. If you select Configure, the Edit
Bonded Interface screen appears.
Step 9.