HP StoreAll Series Installation Manual page 157

2. Install the UFM client software on the couplets and clients:
[root@ib~]# tar -xf ufm-client-utils-2.0.0-28.tgz
[root@ib ~]# cd ufm-client-utilst
[root@ib ufm-client-utils]# ./install.sh
Check dependencies ...
Checking VoltaireOFED ....... OK
Checking version ... 1.4.2_2
Check the distribution ... Red Hat
Proceed ufm-discover package
/usr/src/redhat/SRPMS/ufm-discover-1.0.0-1.src.rpm
ucceed to building ufm-discover package
Preparing...
1:ufm-discover
Proceed ib-gvd package
/usr/src/redhat/SRPMS/ib-gvd-1.0.0-1.src.rpm
Succeed to building ib-gvd package
/usr/src/redhat/RPMS/x86_64/ib-gvd-1.0.0-1.x86_64.rpm
Preparing...
1:ib-gvd
Proceed ufm-client-utils package
/usr/src/redhat/SRPMS/ufm-client-utils-1.0.0-2.src.rpm
Succeed to building ufm-client-utils package
/usr/src/redhat/RPMS/x86_64/ufm-client-utils-1.0.0-2.x86_64.rpm
Preparing...
1:ufm-client-utils
Service ufmdiscoverd installed succesfully.
Service ib-gvd installed succesfully.
DHCP client installed succesfully.
Start ufmagentd.
UFM discover proc
UFM gvd proc started
3. Install the Voltaire UFM server software on the UFM server. This is a management server that
is required to manage the Voltaire InfiniBand switch. This UFM server is attached to the Voltaire
InfiniBand switch through the Ethernet. See Voltaire documentation for installation procedures.
4. The Voltaire UFM GUI automatically adds each server to a full partition. This setup can be
changed by creating environments, local networks, logical server groups, and logical servers
in the UFM GUI to create limited and full partitions.
OK
########################################### [100%]
########################################### [100%]
########################################### [100%]
########################################### [100%]
########################################### [100%]
########################################### [100%]
started
Setting up InfiniBand couplets 157