HP StoreAll Series Installation Manual page 237

1. Open the Fusion Manager GUI from the internet browser, click Cluster Configuration from the
Navigator, and then click Getting Started from the Summary panel.
2. On the Getting Started Wizard menu, select File Servers. The wizard executes a new server
discovery and specifies the new servers as Not Defined in the Hostname column.
3. Select the initial, new, undefined server, and click Configure.
4. On the Configure File Server screen, enter the information for the server, and click OK. Field
names with a preceding asterisk indicate that a field entry is required.
The status of the server is updated on the GUI.
5. Configure the second new server in the same manner as you did in
you click OK, the new server is updated on the GUI. HP StoreAll HA is also configured on the
servers.
6. Click Next on the File Servers screen to save the configuration. The servers are then
automatically registered in the cluster.
7. Exit the wizard.
Expanding an 8800/9320 cluster with an 8800/9320 starter kit 237
Step 3 and Step 4. After