HP StoreAll Series Installation Manual page 243

to associate a VLAN tag with an FSN interface. For more information, see the HP StoreAll
Storage Network Best Practices Guide.
F2 (function key): If you press F2, you can toggle between the default Network
Configuration screen and the Advanced Configuration screen. Use the Network
Configuration screen to change default parameters; and use the Advanced Configuration
screen to modify parameters, such as slaves, bond options, the network role of any bond,
and so forth.
6. If you pressed F2 in
screen, and then select Ok. Otherwise, go to
7. On the Advanced Configuration screen, select an interface.
8. Do one of the following:
To change the number of total networks, celect Back, and then return to
To change bond mode, select Configure, and then go to
To add bond interfaces, select Continue, and then go to
To reconfigure network configuration, press F2, and then return to
Step 7, enter the total number of networks on the Get Total Networks
Step 13.
Step 10.
Step 1 1.
Installing expansion blades 243
Step 6.
Step 5