HP StoreAll Series Installation Manual page 38

Figure 30 HP StoreAll 8800 Storage system cabling—Minimum mixed configuration (HP StoreAll
ENT SAS capacity block and HP StoreAll MDL SAS capacity block)
1. SAS ENT capacity block
2. HP StoreAll node 2, port 1 in slot 1 to MDS SAS capacity
block (port 2, I/O module A, Drawer 2)
3. HP StoreAll node 2
4. HP StoreAll node 1
5. HP StoreAll node 1, port 2 in slot 1 to MDL SAS capacity
block (port 2, I/O module B, Drawer 2
38 Setting up and installing HP StoreAll hardware
6. MDL SAS capacity block
7. SAS ENT capacity block (port 1, I/O module B) to HP
StoreAll node 1, port 2 in slot 4
8. SAS ENT capacity block (port 1, I/O module A) to HP
StoreAll node 1, port 1 in slot 4
9. HP StoreAll node 2, port 2 in slot 1 to MDL SAS capacity
block (port 1, I/O module B, Drawer 1)
10. HP StoreAll node 1, port 1 in slot 1 to MDL SAS
capacity block (port 1, I/O module A, Drawer 1)