HP StoreAll Series Installation Manual page 241

1. Log in to the blade in the initial expansion slot. The X9730 Setup screen appears.
2. On the X9730 Setup screen, select Ok.
The setup wizard verifies the firmware on the system and notifies you if a firmware update is
needed.
IMPORTANT: HP recommends that you update the firmware, if necessary, before continuing
with the installation. HP StoreAll 9730 Storage systems have been tested with specific firmware
recipes. Continuing the installation without upgrading to a supported firmware recipe can
result in a defective system.
3. On the Individual Server Setup screen, provide the host name (blade name). The installation
detects the time settings.
NOTE: The host name, which is the name of the local server, can include alphanumeric
characters and the hyphen (-) special character. It is a best practice to use only lowercase
characters in host names; uppercase characters can cause issues with HP StoreAll OS Software.
Do not use an underscore (_) in the host name.
Installing expansion blades 241