HP StoreAll Series Installation Manual page 231

5. If needed, update the time settings on the Individual Server Setup screen. While setting the
time zone, press Enter while the cursor is positioned in the Time Zone field to display the list
of time zones in a separate screen. Enter the first letter of your time zone, or use the UP and
DOWN arrow keys to find your time zone. Select Ok to accept screen selections.
6. (For HP StoreAll 8800 Storage system only) On the Network Configuration for HP StoreAll
Data Access screen, select one of the following options to configure the network for HP StoreAll
data access:
Flat Networking (combined cluster/user network): Use this option to create a combined
cluster and user network. A single bonded interface (Bond0) is created using all available
NIC ports in node slots 5 and 6 for all network traffic.
Dual Networking (separate cluster and user network): Use this option to create separate
networks for cluster and user traffic. Two bonded interfaces (Bond0 and Bond1) are
Expanding an 8800/9320 cluster with an 8800/9320 starter kit 231