HP StoreAll Series Installation Manual page 71

4. After the registry process completes, repeat the steps in
add another node until all nodes in the storage system have been added. Once all
nodes have been added, continue to
Started Wizard" (page 105)
if applicable, go to
storage" (page
If you select Continue with cluster setup at this console (Local web UI session) or Continue
with cluster setup at this console (Remote web UI session), you can use the web to complete
network configuration details remotely or locally from the storage system. After a message
stating that the management console is to connect to the server appears, enter login
credentials when the subsequent HP StoreAll Management Console screen appears,
continue to "Configuring clusters remotely with the Getting Started Wizard" (page 105)
to complete cluster configuration instructions, and then, if applicable, go to
and configuring HP StoreAll servers and their storage" (page
NOTE: If you opt to continue using the console from which you are working by selecting
Continue with cluster setup at this console (Local web UI session), after the message stating
that the management console GUI is to be launched appears and a web page is
automatically opened, another message may display stating that the connection is an
untrusted one. If this occurs, select Add Exception, and then select Confirm Security
Exception. The login screen for the HP StoreAll Management Console appears. This
exception typically occurs with the Mozilla Firefox browser software application.
If you select Exit Now (You just wanted to setup networking) and you are configuring a
subsequent server, rather than the initial server, the system is ready to be added to a
cluster. If necessary, continue to
Wizard" (page 105)
go to "Discovering and configuring HP StoreAll servers and their storage" (page 127)
If you select Exit Now (You just wanted to setup networking) and you are configuring the
initial server in the installation, to complete the entire installation process properly, you
must select Join this StoreAll server to an existing cluster to join the server to a cluster.
Otherwise, if you are configuring a subsequent server as part of the installation process,
rather than the initial server, the system is ready to be added to the cluster, if you opt to
do so.
NOTE: After you complete this step on the initial server in your storage system and select
one of the cluster options from the X9000 Installation - Network Setup Complete screen, you
will then be required to complete applicable follow-on steps to join the node to a cluster (as
instructed in this step) to properly complete the installation process.
Configuring initial and subsequent nodes on HP StoreAll 8xxx and 93xx Storage systems
"Configuring clusters remotely with the Getting
to complete cluster configuration instructions, and then,
"Discovering and configuring HP StoreAll servers and their
127).
"Configuring clusters remotely with the Getting Started
to complete cluster configuration instructions, and then, if applicable,
Step 1 through this step to
"Discovering
127).
71