HP StoreAll Series Installation Manual page 245

The wizard then obtains OA/VC information from blade 1, uses the login credentials for blade
1, and attempts to automatically enter an IP address.
12. If the wizard fails to acquire OA/VC information, the X9730 Chassis Configuration screen
appears. Before proceeding, enter the SSH User name and password to access OA/VC
information from blade 1 automatically, or enter the OA/VC credentials manually.
The wizard takes the following actions:
Examines the OA and VC firmware and notifies you if an update is needed
Verifies the VC configuration
Creates the hpspAdmin user accounts on the iLOs
Verifies the chassis configuration
Examines the firmware on the SAS switches and notifies you if an update is needed
Verifies the SAS configuration
Examines the storage firmware and notifies you if an update is needed
Verifies the storage configuration
Sets up networking on the blade
13. On the X9000 Installation - Network Setup Complete screen, select Join this StoreAll server
to an existing cluster.
Installing expansion blades 245