HP StoreAll Series Installation Manual page 62

VLAN Tag ID: VLAN capabilities provide hardware support for running multiple logical
networks over the same physical networking hardware. HP StoreAll supports the ability
to associate a VLAN tag with an FSN interface. For more information, see the HP StoreAll
OS Networking Best Practices Guide.
F2 (function key): If you press F2, you can toggle between the default Network
Configuration screen and the Advanced Configuration screen. Use the Network
Configuration screen to change default parameters; and use the Advanced Configuration
screen to modify parameters, such as slaves, bond options, the network role of any bond,
and so forth.
If you press F2 to go to the Advanced Configuration screen, then go to
9. (For HP StoreAll 8200 and 8800 Storage systems only.) Configure the network for iLO access:
a. Select one of the following options from the Network Configuration for iLO Access screen,
and then select Ok:
b. After the User Info! screen automatically appears, review and note screen information.
62 Installing the HP StoreAll OS Software and configuring the HP StoreAll Storage system
Cluster Network—Choose this option if network routing allows the iLO ports on the
servers to be accessed from the cluster network.
Separate iLO Network—Choose this option if the network used to access the server
iLO ports is separate and isolated from the cluster network. An additional network
(bond2) will be created. This network uses ports 0 and ports 1 on the system board.
To accept default entries, select Ok and proceed to the next substep.
To change default entries, select Ok, press F2, and then go to
Step 10.
Step 1 1.