HP StoreAll Series Installation Manual page 250

5. To see the LUNs associated with the physical volumes:
a. Click Vendor Storage from the Navigator and select the new storage expansion module
from the Vendor Storage panel.
b. In the lower Navigator, expand the Summary completely, and click LUN.
Expand an existing file system
To add any or all of the new physical volumes to an existing file system:
1. Create a mountpoint for the file system on the new blades:
# ibrix_mountpoint -c -h ib121-123,ib121-124 -m /ibfs1
2. Mount the file system on the blades:
# ibrix_mount -f ibfs1
3. Extend the file system by doing one of the following:
Use the following StoreAll command:
# ibrix_fs -e -f FSNAME -p PVLIST [-t TIERNAME]
The following command extends file system ibfs1 with physical volumes d39–d68 and
assigns them to data tier SAS:
~]# ibrix_fs -e -f ibfs1 -p
d39,d40,d41,d42,d43,d44,d63,d64,d65,d66,d67,d68 -t SAS
To extend the file system from the GUI:
Select the file system on the Filesystems panel, and then click Extend on the Summary
panel. The Extend Filesystem screen allows you to select the storage to be added to the
file system. If data tiering is used on the file system, you can also enter the name of the
appropriate tier.
250 Installing an HP StoreAll Storage 9730 system Performance Module with the Setup Wizard
h ib121-123,ib121-124 -m /ibfs1