HP StoreAll Series Installation Manual page 208

IMPORTANT:
installation. HP StoreAll 9730 Storage systems have been tested with specific firmware versions.
Continuing the installation without upgrading to a supported firmware version can result in a
defective system.
3. On the Individual Server Setup screen, provide the host name (blade name), if necessary. The
installation detects the time settings.
NOTE:
characters and the hyphen (-) special character. It is a best practice to use only lowercase
characters in host names; uppercase characters can cause issues with HP StoreAll OS Software.
Do not use an underscore (_) in the host name.
4. If needed, update the time settings on the Individual Server Setup screen. While setting the
time zone, press Enter while the cursor is positioned in the Time Zone field to display the list
of time zones in a separate screen. Enter the first letter of your time zone, or use the UP and
DOWN arrow keys to find your time zone. Select Ok to accept screen selections.
5. The Network Configuration screen defines the server as being on Bond0.
208 Expanding an existing HP StoreAll Storage system using the Setup Wizard
HP recommends that you update the firmware before continuing with the
The host name, which is the name of the local server, can include alphanumeric