5.
On the Change OA Network Properties screen, set Enclosure IP to Enable, and press OK to
accept.
6.
On the Network Settings:OA1 Active screen, navigate to Active IPv4, and press OK.
7.
On the Change:OA1 Network Mode screen, change DHCP to Static, and press OK to accept.
8.
On the Change: OA1 IP Address screen, set the IP address, subnet mask, and gateway
(optional), and accept the changes.
9.
On the Network Settings: OA1 Active screen, select Accept All, and press OK.
78
Installing the HP StoreAll OS Software and configuring the HP StoreAll Storage system