HP StoreAll Series Installation Manual page 60

4. The system automatically detects the system time settings; however, if necessary, use the System
Date and System Time fields to update the time settings on the Individual Server Setup screen.
While setting the time zone, press Enter while the cursor is positioned in the Time Zone field
to display the list of time zones in a separate screen. Enter the first letter of your time zone,
or use the UP and DOWN arrow keys to find your time zone.
5. Select Ok to accept the screen time zone selection.
6. On the Network Configuration for HP StoreAll Data Access screen, select one of the following
options to configure the network for HP StoreAll data access, and then select Ok:
Flat Networking (combined cluster/user network): Use this option to create a combined
cluster and user network. A single bonded interface (Bond0) is created using all available
NIC ports in node slots 5 and 6 for all network traffic. See flat and dual networking
information in
(page
Dual Networking (separate cluster and user network): Use this option to create separate
networks for cluster and user traffic. Two bonded interfaces (Bond0 and Bond1) are
60 Installing the HP StoreAll OS Software and configuring the HP StoreAll Storage system
"Before you begin configuring HP StoreAll 8xxx and 93xx Storage systems"
55).