HP StoreAll Series Installation Manual page 98

to associate a VLAN tag with an FSN interface. For more information, see the HP StoreAll
Storage Network Best Practices Guide.
F2 (function key): If you press F2, you can toggle between the default Network
Configuration screen and the Get Network Totals and Advanced Configuration screens.
Use the Advanced Configuration screen to change default parameters; and specify the
number of networks and modify parameters, such as slaves, bond options, the network
role of any bond, and so forth.
NOTE:
number of networks to match HP StoreAll node 1.
6. If you need to configure more than one network, press F2 and complete the following:
a. Enter the total number of networks desired in the Enter Total Networks field of the Get
Total Networks screen.
b. Select Ok. The Advanced Configuration screen appears.
7. Select an interface and then select Continue.
The Configuration Summary lists your configuration.
8. Review displayed configurations, and then select Commit to continue with the installation.
98 Installing the HP StoreAll OS Software and configuring the HP StoreAll Storage system
If multiple networks were chosen for HP StoreAll node 1, use F2 to choose the