HP StoreAll Series Installation Manual page 91

18. Note the following actions performed by the wizard:
Configures the remaining bays for the Virtual Connect modules in the chassis.
Verifies the VC configuration and then creates an hpspAdmin user account on each iLO.
Validates the VC configuration and verifies the SAS firmware. If necessary, the SAS
switches are flashed with the correct firmware.
Verifies the SAS configuration. After determining the correct layout of the storage
hardware, the wizard configures the SAS switch zoning so that couplets see the same
storage.
Configuring the HP StoreAll 9730 Storage systems 91