HP StoreAll Series Installation Manual page 126

2. After mounting the file system on the servers, use the GUI share creation wizard or a StoreAll
command to create the export or share.
Create a NFS export:
ibrix_exportfs -f FSNAME -h HOSTLIST -p
CLIENT1:PATHNAME1,CLIENT2:PATHNAME2, [ -o "OPTIONS"] [-b]
Create an SMB share:
ibrix_cifs -a -f FSNAME -s SHARENAME -p SHAREPATH [-D
SHAREDESCRIPTION] [-S SETTINGLIST] [-h HOSTLIST]
3. Review the output of the appropriate command to verify that the export or share was created:
ibrix_exportfs
ibrix_cifs -i (For SMB shares)
4. If the NFS or SMB share still cannot be created, preformat the storage. See
system cannot be created" (page
126 Configuring clusters remotely with the Getting Started Wizard
l (For NFS export)
124).
"The default file