Installing Additional Hp Storeall 9730 Storage System Blades - HP StoreAll Series Installation Manual

The following series of events occur:
The wizard configures the active management console (Fusion Manager) on this blade.
A configuration script performs tuning functions, imports the LUNs into the HP StoreAll
OS Software, and sets up high availability (HA).
4. After the script is complete, install (if applicable) any remaining blades as described in the
next section.

Installing additional HP StoreAll 9730 Storage system blades

Use this procedure to install blades 2 through 16 on an HP StoreAll 9730 system. Complete the
following procedure on each blade.
NOTE: During this installation process, you may select Cancel to abort the installation or Back
to return to the previous screen. On applicable screens, press F1 to display onscreen help
information.
Configuring the HP StoreAll 9730 Storage systems 95