HP StoreAll Series Installation Manual page 73

The wizard configures the active management console (Fusion Manager) on the server.
4. If Bond0 or cluster network is not routed and the Bond1 or user network is routed, define the
default gateway for Bond1:
a. Set the default gateway in /etc/sysconfig/network.
b. Add a default route for Bond1:
ibrix_nic -r -n IFNAME -h HOSTNAME -A -R ROUTE
For example:
# ibrix_nic -r -n bond1 -h ibrix02a -A -R 10.10.125.1
5. Optional: If you want to be able to access the Fusion Manager through the Bond1/user
network, create a management VIF for Bond1:
ibrix_fm -c <VIF IP address> -d <VIF device> -n <VIF netmask> -v
<VIF type>
For example:
# ibrix_fm -c 10.10.125.101 -d bond1:1 -n 255.255.255.0 -v user
6. To add additional servers (if any), go to
The installation is complete on the initial node. To complete installation procedures, continue to
"Configuring clusters remotely with the Getting Started Wizard" (page
Configuring initial and subsequent nodes on HP StoreAll 8xxx and 93xx Storage systems
Step 1.
105).
73