HP StoreAll Series Installation Manual page 89

Configure the Interconnect IP addresses manually by entering each address on the Set
Interconnect IP Addresses screen, and then select Ok.
14. The wizard then lists the IP addresses specified on the Confirm IC IP Addresses screen, and
then select Ok to continue.
15. Enter the DNS and NTP server information used by the Onboard Administrator.
Afterwards, the wizard configures the OA. This process takes up to 45 minutes to complete.
The wizard verifies the VC configuration and creates a new user called hpspAdmin.
Configuring the HP StoreAll 9730 Storage systems 89