Installing Hp Storageworks Auto Path; Windows 2000 And Windows Nt - HP Open View Installation And Maintenance Manual

Installing HP StorageWorks Auto Path

The Auto Path software is an optional upgrade for the appliance. Install it only if the customer
has purchased the Auto Path license.
You install Auto Path using an automated installation program. When the installation is
complete and the software is running on the host, users can access Auto Path from any PC
connected to the host on which Auto Path is installed.

Windows 2000 and Windows NT

To install Auto Path on a host running Windows 2000 or Windows NT:
1. Log in as the administrator.
2. Insert the HP Auto Path installation CD into the local CD-ROM drive.
3. If Autorun is enabled on the host, the Auto Path installation window opens. Follow the
4. Click Browse and locate the setup.exe file or enter d:\setup\setup.exe in the
5. Click OK to begin the installation.
6. Follow the instructions to complete the installation.
Note:
Windows service.
Continuous Access Storage Appliance Installation and Maintenance Guide
instructions to complete the installation.
If Autorun is not enabled, click Start > Run.
text box. (d:\ is the drive letter of the CD-ROM drive.)
The Auto Path installation window opens.
Install the Auto Path Remote Access Server software as a command line service or as a
Configuring Hosts and Storage Arrays
55