HP StoreAll Series Installation Manual page 59

To configure the initial server in your cluster, which is at the current HP StoreAll OS Software
version:
1. Log in to the initial node by entering root at the login prompt, and then enter hpinvent as
the password. If you have already completed these steps on the initial node, log in to the next
node, if necessary, and perform the steps in this section for subsequent nodes.
The StoreAll Installation — Welcome screen appears.
2. Select Begin to initiate the installation process. The Individual Server Setup screen appears.
3. Enter the host name in the Hostname field.
NOTE: The host name, which is the name of the local server, can include alphanumeric
characters and the hyphen (-) special character. It is a best practice to use only lowercase
characters in host names; uppercase characters can cause issues with HP StoreAll OS Software.
Do not use underscores (_) in the host name.
Configuring initial and subsequent nodes on HP StoreAll 8xxx and 93xx Storage systems 59