HP StoreAll Series Installation Manual page 96

1. Log in to the blade. The X9730 Setup screen appears.
The wizard verifies the firmware on the system and notifies you if a firmware update is needed.
IMPORTANT:
installation. 9730 systems have been tested with specific firmware recipes. Continuing the
installation without upgrading to a supported firmware recipe can result in a defective system.
2. Provide the host name (blade name) on the Individual Server Setup screen. The installation
detects the time settings.
NOTE:
characters and the hyphen (-) special character. It is a best practice to use only lowercase
characters in host names; uppercase characters can cause issues with HP StoreAll OS Software.
Do not use an underscore (_) in the host name.
96 Installing the HP StoreAll OS Software and configuring the HP StoreAll Storage system
HP recommends that you update the firmware before continuing with the
The host name, which is the name of the local server, can include alphanumeric