BSR 64000 Command Reference Guide
ip dvmrp default-information originate
The ip dvmrp default-information originate command advertises network 0.0.0.0
to DVMRP neighbors and the multicast backbone. The no ip dvmrp
default-information originate command prevents network 0.0.0.0. from being
advertisied to DVMRP neighbors and the multicast backbone.
Use the ip dvmrp default-information originate command with the ip dvmrp
metric-offset command to configure the metric used when advertising the default
route 0.0.0.0.
Group Access
ISP
Command Mode
Interface Configuration
Command Line Usage
ip dvmrp default-information originate [only]
no ip dvmrp default-information originate
Command Syntax
only
Command Default
disabled
12-4
the default DVMRP route is distributed to
neighbors only