Arp Timeout - Motorola BSR 64000 Reference Manual

arp timeout

The arp timeout command configures the amount of time an entry stays in the ARP
cache. The no arp timeout command removes the time configuration an entry stays
in the ARP cache.
Use the show interfaces command in EXEC mode to view the ARP time-out value.
Note: When the ARP time-out value is changed, the change affects all the
existing entries in addition to the entries subsequently created.
Group Access
MSO
Command Mode
Interface Configuration
Command Line Usage
arp time-out <minutes>
no arp timeout <minutes>
Command Syntax
minutes
Command Default
60 minutes
amount of time an entry is allowed to stay in
the ARP cache; valid values 1 to 6000
CMTS Commands
13-3