Administrator's Handbook
IP Diagnostics Page Redirect
In the event that your connection to the Internet fails, the Broadband LED will flash
to the IP Diagnostics page.
Follow the on-screen troubleshooting suggestions.
For additional troubleshooting information, see
When your connection is restored or the problem is resolved, the Broadband LED will turn GREEN.
☛
Note:
For AT&T this function is enabled by default. See the CLI command
enable [ off | on ]" on page
Offline Troubleshooting
If the WAN is down, the following will be displayed at the top of the page.
26
"Diagnostics" on page 80
149.
RED
and you are redirected
and
"Basic Troubleshooting" on page
"set management lan-redirect
89.