BSR 64000 Command Reference Guide
show ip igmp groups
The show ip igmp groups command displays multicast groups connected to a
specific router using IGMP.
Use the show ip igmp groups command to display the following IGMP
group information:
Group Address
Interface
Uptime
Expires
Last Reporter
Group Access
All
Command Mode
All modes except User EXEC
Command Line Usage
show ip igmp groups [summary]
Command Syntax
summary
9-12
multicast address
interface reachable
hours, minutes, and seconds multicast known
hours, minutes, and seconds until the entry is
removed from IGMP groups table
last host of multicast group
shows summary report of IGMP groups