Qos Queue Bw - Motorola BSR 64000 Reference Manual

qos queue bw

The qos queue bw command sets the percentage of bandwidth for the specified queue
of an interface.
Use the qos queue bw command to manage traffic such that higher bandwidth is
appropriated to the high priority traffic. The remaining percentage bandwidth is
shared among the other queues, which have not been set by this command. If all of the
queues have been set and if the total of all bandwidth allocated doesn't match to
100%, then an error is displayed.
Group Access
MSO
Command Mode
Interface Configuration
Command Line Usage
qos queue <0-3> bw <0-100>
no qos queue <0-3> bw <0-100>
Command Syntax
0-3
0-100
the queue number belonging to a physical
interface
the percentage of total bandwidth allocated to
the queue
QoS Commands
14-7