Show Cable Modem Time-Registered - Motorola BSR 64000 Reference Manual

show cable modem time-registered

The show cable modem time-registered command displays how long a cable
modem has been registered. This command can be used to specify individual cable
modems, cable modems associated with a particular BSR 64000 chassis slot, or cable
modems associated with a particular Spectrum Group. The following information is
provided:
Interface
Connect State
Mac Address
Registration Time
Spectrum Group:
Cable modem connectivity states are as follows:
online
online(d)
online(un)
online(pk)
online(pt)
reject(m)
cable modem interface with active
connection
describes the connectivity state of a cable
modem. The table below describes the 20
cable modem connectivity states
supported on the BSR.
cable modem Media Access Control layer
address
the length of time a cable modem has been
registered in ddd:hh:mm:ss format
the associated Spectrum Group name
CM registered; enabled for data.
CM registered, but network access for the
CM is disabled.
CM registered, but not enabled data. Fail
to verify modem's identity by BPI module.
CM registered; baseline privacy interface
(BPI) enabled, and key encryption key
(KEK) is assigned.
CM registered; BPI enabled, and traffic
encryption key (TEK) is assigned.
CM did attempt to register; registration
was refused due to bad mic.
CMTS Commands
13-129