BSR 64000 Command Reference Guide
enable password
The enable password command allows you to specify a password associated with the
enable command. After specifying the password, entering the enable command at the
User EXEC prompt causes the system to prompt you for the password. You must
supply the password to enter the Privileged EXEC mode. The no enable password
command deletes the password.
Group Access
System Administrator
Command Mode
Global Configuration
Command Line Usage
enable password {0 | 7 }<LINE>
no enable password
Command Syntax
0
7
LINE
1-20
specifies an UNENCRYPTED
password
specifies a HIDDEN password
the password (31 character
maximum)